Close

    • Forced Motors getting over 700 horsepower out of their Audi 8V RS3 hatch on the stock 2.5 TFSI internals with a PT6262

      The aluminum block dual-injected 2.5 TFSI Audi turbo inline-5 is on a tuning roll. How does over 700 horsepower on the stock internals sound? That is what Forced Motors in Germany was able to achieve with a Precision PT6262 turbocharger.


      This is the result at the crank with 2.1 bar or 30.4 psi:


      DIN correction will read slightly higher but basically this is in that 700 horsepower ballpark.

      Here are the mods:

      - Snow Performance WMI
      -Autotech
      -straight 5 header
      -boost pipe
      -PT6262 at 2,1bar redline
      -still stock internals (engine and gearbox)

      The car does 100-200 kph in 4.5 seconds:


      So what's next? A bigger turbo, forged internals, extra injectors, and whatever else is necessary to push to the next level.

      This article was originally published in forum thread: Forced Motors getting over 700 horsepower out of their Audi 8V RS3 hatch on the stock 2.5 TFSI internals with a PT6262 started by Sticky View original post
      Comments 4 Comments
      1. UkuRiSh's Avatar
        UkuRiSh -
        what fuel was used ?
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by UkuRiSh Click here to enlarge
        what fuel was used ?
        No idea but its supplemented with methanol.
      1. BCPuller's Avatar
        BCPuller -
        The torque number is way up there too, 855 nm is like 630 ft lb. Iirc Hank's RS3 sedan has torque capped at about 500ish but he's about the same hp range.
      1. Dream's Avatar
        Dream -
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        No idea but its supplemented with methanol.
        102 ROZ ~ 95 AON